The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both.
Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.
For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.
The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both.
Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.
For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.
I have about five jeeps, all with the typical cb radios and recently acquired a GMRS. I was trying to find a decent mount and had seen one brand that mounted magnetically. But I was worried about interference of the compass, on this particular model.
That’s when I came across JeepUniq.
I found great help trying to figure out which mount I needed for my unlisted radio. After sending in a few photos I was given the type of upper mount to select.
I also like that there’s a small, curved area within the upper mount to route a power cable. Only one thing I’d suggest is on the secondary, upper mount would be an access hole for radios like my BTECH that utilize USB c power cables that have the charging port on back.
S
S.T. (Joliet, US)
Great product!
Great product and fast shipping. Keeps my radio and mic secure.
Jimmy P. (Anaheim, US)
Simple, Yet Very Satisfied
These mounts may look like a simple mount from a far, but up close you can tell a lot of thought went into them. I haven’t had it that long at this point to see the longevity of this product but the quality looks and feels top notch. They do include a couple different inserts choices for the handheld radio which is another nice touch. I’ve already used two different handheld radios on this mount and both hold well using the same clip insert. My only wish so far is that the mount angled a little more than slightly towards the driver. Overall, very satisfied and definitely recommend🤙🏼 2017 JKU
M
Michael W. (Terre Haute, US)
Equipment mount
The handheld radio attachment part is fine, my Motorola mobile radio microphone part, does not fit as well, but will work for now, the gap on the back of the mic portion is not as wide as the actual hook on the mount, it goes on, just not secure as I would like, I think over time as I am using the mic, the hook part will thin out from use, other than that, happy with the ease of installing the mount, thank you
L
Luis E. (Guatemala City, GT)
Great!
It just an awesome product! I love it!
f
fiona c. (Houston, US)
Part worked perfectly!
B
Brayan R. (Moreno Valley, US)
Es guud
D
David B. (Jeffersonville, US)
Looks great
Cleans up the interior Of the jeep nice. Radios are very handy. I’d recommend for sure !
X
Xavier P. (San Juan, PR)
Simply the Best
This is my second purchase, they are great of assisting making sure that they match your radio in mic or in the HT base.! its my only choice for my jeep.
M
Matthew R. (Atlanta, US)
Brilliant solution!
I just got my Technicians license and picked up a Yaesu FT70. I looked around for mounts for my 2013 Wrangler - and stumbled across this design. Such a clean install and honestly, a brilliant solution to mounting a radio using the stock grab bar. Took me under 15 minutes total. The much holder is great, I ran an off-road event, and it held my Yeasu mic perfect. This thing is bomb proof, 80 MPH in the Sandhills and the radio and mic stayed put. I’d definitely recommend it if you have a Wrangler and a HT!
Bonus - by changing the included belt clip adapter it also worked on a friends TYT radio (in the picture).
I have about five jeeps, all with the typical cb radios and recently acquired a GMRS. I was trying to find a decent mount and had seen one brand that mounted magnetically. But I was worried about interference of the compass, on this particular model.
That’s when I came across JeepUniq.
I found great help trying to figure out which mount I needed for my unlisted radio. After sending in a few photos I was given the type of upper mount to select.
I also like that there’s a small, curved area within the upper mount to route a power cable. Only one thing I’d suggest is on the secondary, upper mount would be an access hole for radios like my BTECH that utilize USB c power cables that have the charging port on back.
S
S.T. (Joliet, US)
Great product!
Great product and fast shipping. Keeps my radio and mic secure.
Jimmy P. (Anaheim, US)
Simple, Yet Very Satisfied
These mounts may look like a simple mount from a far, but up close you can tell a lot of thought went into them. I haven’t had it that long at this point to see the longevity of this product but the quality looks and feels top notch. They do include a couple different inserts choices for the handheld radio which is another nice touch. I’ve already used two different handheld radios on this mount and both hold well using the same clip insert. My only wish so far is that the mount angled a little more than slightly towards the driver. Overall, very satisfied and definitely recommend🤙🏼 2017 JKU
M
Michael W. (Terre Haute, US)
Equipment mount
The handheld radio attachment part is fine, my Motorola mobile radio microphone part, does not fit as well, but will work for now, the gap on the back of the mic portion is not as wide as the actual hook on the mount, it goes on, just not secure as I would like, I think over time as I am using the mic, the hook part will thin out from use, other than that, happy with the ease of installing the mount, thank you
L
Luis E. (Guatemala City, GT)
Great!
It just an awesome product! I love it!
f
fiona c. (Houston, US)
Part worked perfectly!
B
Brayan R. (Moreno Valley, US)
Es guud
D
David B. (Jeffersonville, US)
Looks great
Cleans up the interior Of the jeep nice. Radios are very handy. I’d recommend for sure !
X
Xavier P. (San Juan, PR)
Simply the Best
This is my second purchase, they are great of assisting making sure that they match your radio in mic or in the HT base.! its my only choice for my jeep.
M
Matthew R. (Atlanta, US)
Brilliant solution!
I just got my Technicians license and picked up a Yaesu FT70. I looked around for mounts for my 2013 Wrangler - and stumbled across this design. Such a clean install and honestly, a brilliant solution to mounting a radio using the stock grab bar. Took me under 15 minutes total. The much holder is great, I ran an off-road event, and it held my Yeasu mic perfect. This thing is bomb proof, 80 MPH in the Sandhills and the radio and mic stayed put. I’d definitely recommend it if you have a Wrangler and a HT!
Bonus - by changing the included belt clip adapter it also worked on a friends TYT radio (in the picture).